Ameralloy® OilOIL HARDENING
AISI 0-1
Ameralloy Oil is the most widely used grade of drill rod. It is a general purpose tool steel with premium hardening, wear resistance, and toughness.
Typical Analysis (GENERAL PURPOSE)
- Carbon .90
- Manganese 1.20
- Silicon .30
- Tungsten .55
- Chromium .65
- Vanadium .30
- Molybdenum .15
Ameralloy® -60AIR HARDENING
AISI A-6
Ameralloy-60 has a minimum distortion characteristic which makes it particularly well suited for dies and punches in blanking and forming operations.
Typical Analysis
- Carbon .70
- Molybdenum .09
- Manganese 2.10
- Silicon .30
- Chromium 1.00
- Vanadium 1.35
Ameralloy® -AirAIR HARDENING
AISI A-2
Ameralloy Air is recommended over Ameralloy Oil when increased wear resistance, safe hardening, and less distortion are required.
Typical Analysis (MINIMUM DISTORTION)
- Carbon 1.00
- Molybdenum 1.15
- Manganese .60
- Silicon .20
- Chromium 5.75
- Vanadium .25
Ameralloy® D-2HIGH CARBON/HIGH CHROME
AISI D-2
Ameralloy D-2 is an air-hardening steel known for maximum wear resistance. It is ideal for use in tools, dies, and used in long production runs.
Typical Analysis (MAX. WEAR RESISTANCE)
- Carbon 1.55
- Molybdenum 1.00
- Manganese .55
- Silicon .35
- Chromium 12.50
- Vanadium 1.00
Ameralloy Flat Ground Tolerances
| Thickness – regular Thickness – oversize Thickness – metric |
± .001 ” +.010/.015” +.05mm/-O |
| Width – regular Width – oversize Width – metric |
+ .000/.005” + .010/.015” + .2mm/-0 |
| Squares – regular Squares – oversize |
± .001 ” + .010/.015” |
| Length 18” Length 24” Length 36” |
+ .125/.250” + .1875/.375” + .250/ .500” |
| Squareness – edge Squareness – end |
.003” per inch .004” per inch |
AmeralloyLOW CARBON
Typical Analysis
- Carbon .18
- Manganese .50
- Silicon .20
- Phosphorus .04
- Sulphur .04
Durelloy™ GFSHEAT TREATED
Typical Analysis
- Thickness +.005, -.000 Mattison ground
- Width +.005, -.000 Blanchard ground
- Length plus 1/8” saw cut
- Heat treated to 28–32 Rockwell C
Ameralloy® -7 SUPER SHOCK
AISI S-7
Ameralloy-7 is our new, premium quality air hardening drill rod. It’s the toughest, strongest drill rod for many applications that require maximum strength and impact.
Typical Analysis (MAXIMUM STRENGTH)
- Carbon .50
- Molybdenum 1.40
- Manganese .70
- Silicon .25
- Chromium 3.25
High Speed-2HOT WORK
AISI M-2
Ameralloy High Speed-2 is the most widely used type of high speed tool steel. It’s higher carbon content and balanced analysis produce ideal properties for high speed use.
Typical Analysis
- Carbon .86
- Molybdenum 5.00
- Tungsten 6.35
- Chromium 4.15
- Vanadium 1.90
Not sure what you are looking for? Contact Ameralloy Steel an ISO 9001 certified supplier that specializes in finding hard-to-find Stainless and Alloys. Along with our proprietary grades Amera-Braze, Durelloy, and Dura-Krome. Our knowledgeable sales team will help you find what you are looking for. With many shapes, sizes, and material grades available, we can help you find what you are looking for. The most common items stocked are Tube, Pipe, Sheet, Plate, Hex bar, Square bar, Round bar, Threaded bar, Pump Shaft, and Millimeter sizes. We offer added fabrication services. Contact us now for the current price and delivery.