Ameralloy® Oil OIL HARDENING
AISI 0-1
Ameralloy Oil is the most widely used grade of drill rod. It is a general purpose tool steel with premium hardening, wear resistance, and toughness.
Typical Analysis (GENERAL PURPOSE)
- Carbon .90
- Manganese 1.20
- Silicon .30
- Tungsten .55
- Chromium .65
- Vanadium .30
- Molybdenum .15
Ameralloy® -60AIR HARDENING
AISI A-6
Ameralloy-60 has a minimum distortion characteristic which makes it particularly well suited for dies and punches in blanking and forming operations. Also recommended for gages or other tools where close size tolerance is required.
Typical Analysis
- Carbon .70
- Molybdenum 1.35
- Manganese 2.10
- Silicon .30
- Chromium 1.00
- Sulfur .09
Ameralloy® -Air AIR HARDENING
AISI A-2
Ameralloy Air is recommended over Ameralloy Oil when increased wear resistance, safe hardening, and less distortion are required.
Typical Analysis (MINIMUM DISTORTION)
- Carbon 1.00
- Molybdenum 1.15
- Manganese .60
- Silicon .20
- Chromium 5.75
- Vanadium .25
Ameralloy® D-2HIGH CARBON/HIGH CHROME
AISI D-2
Ameralloy-60 has a minimum distortion characteristic which makes it particularly well suited for dies and punches in blanking and forming operations. Also recommended for gages or other tools where close size tolerance is required.
Typical Analysis (MAX. WEAR RESISTANCE)
- Carbon 1.55
- Molybdenum 1.00
- Manganese .55
- Silicon .35
- Chromium 12.50
- Vanadium 1.00
Ameralloy® W1&W2WATER HARDENING
AISI W1–W2
Ameralloy W1 and W2 are water hardening grades formulated to meet the needs of the machine shop. Well suited for average work where premium grades are not required.
Typical Analysis
- Carbon .60–1.40 .80–1.25
- Manganese .25 .25
- Silicon .20 .25
- Vanadium — .25
High Speed-2AISI M-2
Ameralloy High Speed-2 is the most widely used type of high speed tool steel. It’s higher carbon content and balanced analysis produce properties applicable to all general purpose high speed uses.
Typical Analysis
- Carbon .83
- Molybdenum 5.00
- Tungsten 6.35
- Chromium 4.15
- Vanadium 1.90
Ameralloy® -7SUPER SHOCK
AISI S-7
Ameralloy-7 is our new, premium quality air hardening drill rod. It’s the toughest, strongest drill rod for many applications that require maximum strength and impact.
Typical Analysis (MAXIMUM STRENGTH)
- Carbon .50
- Molybdenum 1.40
- Manganese .70
- Silicon .25
- Chromium 3.25
Ameralloy® -13HOT WORK
AISI H-13
Ameralloy-13 combines good red hardness with abrasion resistance and resists heat checking. Ameralloy-13 is made from vacuum degassed tool steel ingots. This process plus carefully controlled hot work provides optimum uniformity, consistent response to heat treatment, and long service life.
Typical Analysis (EXTENDED SERVICE LIFE)
- Carbon .40
- Molybdenum 1.50
- Manganese .40
- Silicon 1.10
- Chromium 5.25
- Vanadium 1.10
Not sure what you are looking for? Contact Ameralloy Steel an ISO 9001 certified supplier that specializes in finding hard-to-find Stainless and Alloys. Along with our proprietary grades Amera-Braze, Durelloy, and Dura-Krome. Our knowledgeable sales team will help you find what you are looking for. With many shapes, sizes, and material grades available, we can help you find what you are looking for. The most common items stocked are Tube, Pipe, Sheet, Plate, Hex bar, Square bar, Round bar, Threaded bar, Pump Shaft, and Millimeter sizes. We offer added fabrication services. Contact us now for the current price and delivery.