Amera-Braze 520 is a heat treated, abrasion resistant alloy steel plate and strip. With a combination of excellent toughness and high hardness, a reduction of dead weight can be achieved by using Amera-Braze 520 in half the thickness of the original chute, liner, or wear area.
Tensile strength psi | 245,000 |
Yield point psi | 230,000 |
Elongation in 2” | 9% |
Reduction of area | 40% |
Brinell hardness | 480–520 |
Use low hydrogen high tensile electrodes: AWS specification E100XX, E110XX, or E120XX electrodes.
Consult Ameralloy plant for welding and fabrication information.
Special forming and fabrication procedures required.
Amera-Braze 520 Platess
Thickness: 1/4” 3/8” 1/2” 5/8” 3/4” 1” 1-1/4” 1-1/2” 1-3/4” 2” 2-1/2” 3”
Thicknesses over 3” upon request
Widths: 48” 60” 72” 84” 96” or burned to your specifications
Lengths: 96” 120” 144” 240” 288” or burned to your specifications
Amera-Braze 520 Wear Strips
Thickness: 1/4” 3/8” 1/2” 5/8” 3/4” 1” 1-1/4” 1-1/2” 1-3/4” 2”
Thicknesses over 2” burned to your specifications
Widths: Burned to your specifications
Lengths: Maximum of 24